6116075-1 Without Magnetics Modular Ethernet Female Connector 8P8C 56 Series RJ-45 Jack

Categories	Connectors, Interconnects
	Modular Connectors - Jacks
Application-LAN	ETHERNET(NoN POE)
Connector Type	RJ45
Number of Positions/Contacts	8p8c
Number of Ports	1x1
Applications Speed	RJ45 Without Magnetics
Mounting Type	Through Hole
Orientation	90° Angle (Right)
Termination	Solder
Height Above Board	13.40 mm
LED Color	With LED
Shielding	Shielded
Features	Board Guide
Tab Direction	UP
Contact Material	Phosphor Bronze
Packaging	Tray
Operating Temperature	-40°C ~ 85°C
Contact Material Plating Thickness	Gold 6.00µin/15.00µin/30.00µin/50.00µin
Shield Material	Brass
Housing Material	Thermoplastic
RoHS Compliant	YES-RoHS-5 WIth Lead in Solder Exemption

  When designing the signal integrity of the RJ connector, you need to consider: 1:The impedance continuity with the entire interconnected transmission line; 2:The crosstalk between the pins of the RJ; 3:There are timing requirements, and the delay on the RJ must be considered. The analysis method of RJ is basically the same as the general signal analysis method, which is to use simulation software to simulate, analyze the effect and draw conclusions. RJ model analysis and circuit model analysis are the same, just pay attention to the accurate modeling and simulation of RJ and via effect is very important to guess the signal quality.