ARJ11G-MBSA-MU2 10/100 Base-T 180 Degre Vertical Jack Magnetic RJ45 Connector Without LED
Categories
Connectors, Interconnects
Modular Connectors - Jacks With Magnetics
Application-LAN
ETHERNET(NoN POE)
Connector Type
RJ45
Number of Positions/Contacts
8p8c
Number of Ports
1x1
Applications Speed
10/100 Base-T, AutoMDIX
Mounting Type
Through Hole
Orientation
180°
Termination
Solder
Height Above Board
17.00mm
LED Color
Without LED
Shielding
Shielded
Features
Board Guide
Tab Direction
UP
Contact Material
Phosphor Bronze
Packaging
Tray
Operating Temperature
-40°C ~ 85°C
Contact Material Plating Thickness
Gold 6.00µin/15.00µin/30.00µin/50.00µin
Shield Material
Brass
Housing Material
Thermoplastic
RoHS Compliant
YES-RoHS-5 WIth Lead in Solder Exemption
The basic functions of the connector can be divided into three categories: mechanical function, electrical function and environmental function. 1, mechanical function As far as the connection function is concerned, the insertion force is an important mechanical function. Insertion and extraction force is divided into penetration force and extraction force (extraction force is also called separation force), the requirements of the two are different. In the relevant standards, there are rules for large penetration force and small separation force, which shows that from the point of view of application, the penetration force should be small (there are structures of low penetration force LIF and non-penetration force ZIF), and separation force If it is too small, it will affect the reliability of the touch. Another important mechanical function is the mechanical life of the connector. Mechanical life is actually a durability target, which is called mechanical operation in the national standard GB5095. It takes one insertion and one extraction as a cycle, and whether the connector can normally complete its connection function (such as touch resistance value) after a regular plug-in cycle is used as the judgement basis. The plug-in force and mechanical life of the connector are related to the structure of the touch element (the magnitude of the positive pressure) the coating quality of the touch part (the sliding friction coefficient) and the dimensional accuracy (alignment) of the touch element. It is also related to surface treatment, especially electroplating skills. The pre-treatment of electroplating and the electroplating process will present the elements of data modification, including hydrogen embrittlement, internal stress of the coating and crystalline modification.
