HCJT1-802SK-L11 Tab-Up 1x1 Port 8P/8C Tab-Up Shielded RJ45 Ethernet Connectors
Categories
Connectors, Interconnects
Modular Connectors - Jacks
Application-LAN
ETHERNET(NoN POE)
Connector Type
RJ45
Number of Positions/Contacts
8p8c
Number of Ports
1x1
Applications Speed
RJ45 Without Magnetics
Mounting Type
Through Hole
Orientation
90° Angle (Right)
Termination
Solder
Height Above Board
13.40 mm
LED Color
With LED
Shielding
Shielded, EMI Finger
Features
Board Guide
Tab Direction
UP
Contact Material
Phosphor Bronze
Packaging
Tray
Operating Temperature
-40°C ~ 85°C
Contact Material Plating Thickness
Gold 6.00µin/15.00µin/30.00µin/50.00µin
Shield Material
Brass
Housing Material
Thermoplastic
RoHS Compliant
YES-RoHS-5 WIth Lead in Solder Exemption
There are five conditions for model analysis 1. Multi-line model (MLM): Suitable for multi-pin RJ, including touch components, coupling between touch and touch, coupling between touch and shielding, coupling between pads, etc. In addition to the parameters imitated by SLM, it can also be used to imitate crosstalk and ground bounce. 2. Single wire model (SLM): Suitable for single wire in RJ, such as high-speed signal transmission line, which can be used to simulate reflection, delay and offset, attenuation and signal transmission quality. 3.S parameter model: mainly used in the frequency domain, which can imitate throughput and crosstalk. Through time domain conversion, impedance, crosstalk, transmission delay and eye diagrams can occur. 4. IBIS model: It is a way to quickly and accurately model the I/O BUFFER based on the V/I curve, supporting all types of RJ and a variety of different RJ modeling, such as differential and unbalanced signaling, SLM (without Coupling), MLM (coupling), model cascading, board-to-board and board-to-cable, etc. 5. SPICE model: It is a ubiquitous circuit-level simulation program. The components in the analyzed circuit can include resistance, capacitance, inductance, mutual inductance, independent voltage source, independent current source, various linear controlled sources, transmission lines, and active semiconductors equipment.
