HFJT1-1G01RL Without LED 1000M Ethernet RJ45 Connector With Magnetic
Categories
Connectors, Interconnects
Modular Connectors - Jacks With Magnetics
Application-LAN
ETHERNET(NoN POE)
Connector Type
RJ45
Number of Positions/Contacts
8p10c
Number of Ports
1x1
Applications Speed
100/1000 Base-T, AutoMDIX
Mounting Type
Through Hole
Orientation
90° Angle (Right)
Termination
Solder
Height Above Board
0.537" (13.65mm)
LED Color
Without LED
Shielding
Shielded, EMI Finger
Features
Board Guide
Tab Direction
UP
Contact Material
Phosphor Bronze
Packaging
Tray
Operating Temperature
-40°C ~ 85°C
Contact Material Plating Thickness
Gold 6.00µin/15.00µin/30.00µin/50.00µin
Shield Material
Brass
Housing Material
Thermoplastic
RoHS Compliant
YES-RoHS-5 WIth Lead in Solder Exemption
7 problems that need to be paid attention to when using RJ connector 1. Use successive power and ground plane layers; 2. Try to prevent right angles from being used in wiring; 3. Impedance control, reflection and signal terminal matching; 4. Physically block the active components against noise devices; 5. The length of the differential pair wiring should be equal to ensure a good compression ratio at the receiving end; 6. Crosstalk questions should be considered in high-speed circuit design, including near-end crosstalk and far-end crosstalk; 7. Power supply decoupling question, that is to say, the power supply added to the circuit must be decoupled by inductance and capacitance.
