2-1734473-1 Without LED Cat5 LAN JACK 2x8 Port Ethernet RJ45 Connector
Categories
Connectors, Interconnects
Modular Connectors - Jacks
Application-LAN
ETHERNET(NoN POE)
Connector Type
RJ45
Number of Positions/Contacts
8p8c
Number of Ports
2x8
Applications Speed
RJ45 Without Magnetics
Mounting Type
Through Hole
Orientation
90° Angle (Right)
Termination
Solder
Height Above Board
27.31 mm
LED Color
Without LED
Shielding
Shielded, EMI Finger
Features
Board Guide
Tab Direction
UP & Down
Contact Material
Phosphor Bronze
Packaging
Tray
Operating Temperature
-40°C ~ 85°C
Contact Material Plating Thickness
Gold 6.00µin/15.00µin/30.00µin/50.00µin
Shield Material
Brass
Housing Material
Thermoplastic
RoHS Compliant
YES-RoHS-5 WIth Lead in Solder Exemption
Connector function application: signal transmissionSignal transmission can be divided into two categories: simulation signal transmission and digital signal transmission. Regardless of the analog or digital signal RJ connector, its required function should be able to protect the integrity of the transmitted voltage pulse signal, the integrity should include the waveform of the pulse signal and its amplitude. The pulse frequency of the data signal is different from the simulation signal. The pulse transmission speed determines the frequency of the protected pulse. The transmission speed of the data pulse is much faster than some typical simulation signals. Some pulses are in the RJ connector. The transmission speed has been close to the one-hundred-billionth of a second. In today’s microelectronics technology, the RJ connector is generally regarded as a wire, because the wavelength associated with such a fast-growing frequency can be compared to the RJ connection The standard of the device.When the RJ connector or interconnection system such as a cable installation is used in high-speed data signal transmission, the corresponding description of the function of the RJ connector also changes. The characteristic impedance instead of the resistance and the crosstalk in the interconnection system have become especially important. Controlling the characteristic impedance of the RJ connector has become a major trend of consciousness, and crosstalk is controlled in the cable. The characteristic impedance has such a primary orientation in the RJ connector, because the geometric shape of the resistance is difficult to be completely consistent, and the RJ connector standard is very small, it is necessary to minimize the possibility of crosstalk. In the cable, the control of the geometric shape is easier to complete, and its characteristic impedance is also easy to control, but the length of the cable may cause potential crosstalk.
